Switchgears

  GENERAL DESCRIPTION
  AECO- The innovators in the field of manufacture of L T switchgear since 1958.
  Conforming to the latest .IS: 13947 (Pt- 3)-1993 National Specifications and IEC 947 Pt-3 International Specifications.
  Tested from CPRI, IIT, ERDA and other recognized laboratories.
  Approved by MES, Railways, DGS&D, PWDs.. NTPC and all State Electricity Boards.
  Most ideal and handy for effective control of repeated switching operations of air conditioners, refrigerators, geysers and other household electrical appliances. Extensively used as industrial main control switch.

SWITCH FUSE UNIT
 

  RANGE

    
         
  Switch Fuse/Fuse Switch units :    
    16A/240V to 500A/415V SP&N, DP, TP and TP&N.

 
  Changeover Switches :  
    16A/415Vto 300A/415V DP, FP.  
  Distribution Fuse Boards :  
    16A/240V 2 way to 8 way.  
  Fuse Units (Kit/Kats) :   
    16A/240V to 500A/ 415V.  
  Bus Bar Chambers :  
    63A/415V to400A/415V in 4 pole.  
  Front Operation Switches :  
    20A/240V SP&N and 32A/240V SP&N.  
     

 

FUSE SWITCH UNIT
 

  SPECIFICATIONS

    
         
    Switch Fuses / Fuse Switches / Changeover Switches

Distribution Fuse Boards

  
   

Conforming to the latest IS:13947 (Part- 3)-1993 National and IEC Pub 947 -3 (1990) International Specifications for the severest AC-23A utilization category. Also conforming to IS: 1 0027/1981 specifications.

  
       
    Distribution Fuse Boards  
    Conforming to IS:2675-1983  
       
    Rewirable Fuse Units (Kit Kats)  
    Conforming to the latest IS:2086-1993 Type A specifications.  
     

DISTRIBUTION FUSE BOARD

  
 

  FEATURES

    
         
  Tropicalised, rust proof, sheet steel enclosures in two-tone powder coating. Sturdy and sleek.

 
  Coloured Labels provide clear On/Off indication.  
  The housings go through a rigorous anti~ rust conditioning with seven tank system to ensure smooth and lasting finish against corrosive / humid atmosphere.  
  Generous wiring space.  
  Quick make and quick break operation.. independent of the speed of the operato( thus minimising the arcing.  
  Ideally suited for direct termination of PVC aluminium / copper conductor cable/ Bus bar.  
  The switches can be mounted easily for individual use or on industrial pattern boards. Entry holes are provided at the top and bottom and also at the rear side of the switch to facilitate cable connections Trom any side.

CHANGEOVER SWITCH

  
  Hard bright tin plated contacts for high conductivity and longer life.    
  Fully shrouded live parts.

 
  Peak load breaking capacity on manual operations.  
  Foolproof interlocking mechanism.  
  Fuse Units are of vitrified glazed porcelain of high electrical and mechanical strengths as per the latest IS:2086-1993 specifications.  
  Convenient conversion of Rewirable to HRC and vice-versa is possible.  
  Cable end box for higher ratings is available on request.  
  Provided with two external earthing terminals to ensure complete earthmg.  
  In Fuse Swithces there is 2-way isolation of fuses.  
     

BUS BAR CHAMBER

  
 

  PORCELAIN FUSE UNITS

    
         
  For domestic, commercial and industrial applications.

Fuse Units (Kit Kats)

  
  Manufactured from high grade vitreous porcelain in cream shade.  
  Available with extension strip on ratings 1 OOA and above on request.  
  In HRC type carrier, there is an aperture provided to give visual fuse-blown indication.  
  High conductivity plating to ensure lowest power losses.

FUSE UNIT (KIT KAT)